Application
Dimensions/Weight				1560mm (w) x 850mm(d) x 1900mm (h) / 1250Kg
Power requirements				AC 200-230 V ±10 %  3ф/30A       (Note3)
Air  requirements				0.5 MPa
Max. Test area			610mm x 510mm
Board size			50mm x 50mm    -   620mm x520mm
Board thickness			0.1mm - 6 mm
Specification			Standard			Option
Min. Testing size Note1		Pattern pitch	40µm		40µm  (Note1)
		Pad size	20µm		15µm  (Note1,2)
Probe		Probe heads	4 Probe heads  (2probes each side)
		Repeatability accuracy	±1 µm
		Contact pressure	2 -10 g (min)
CCD camera			4 Units ( 1unit /side)
Isolation Test voltage			1000V (max)                  (Note4)
Low resistance Test current			100mA         (Typ)
Test method	Open detection       (continuity test) Note5		Range: 0.1Ω - 10MΩ
	Short detection (Isolation test)		Range: up to 500MΩ max				Range: up to 1GΩ max
	Capacitance measurement		Comparison with master data
	4wire Low.resistance.measurement		Range: 0.1mΩ- 10KΩ
	Resistance             Capacitance             Inductance Embedded passive component test function Option		Range: 0.1Ω to 1GΩ (Typ) Range:1pF to 10uF     (Typ) Range:10uH to 100mH  (Typ)
Data Management	Input format		IPC D 356A /MNF /Others
	Job Creator		Job Creator  Optionally available from Miyachi
	Test data preparation		Smart Miyachi  Optionally available from Miyachi
	Failure analysis		Commercially available s/w

Notes
1. Specified at room temperature = 23±3℃.
2. As the probing performance of machine, not as the specification including probe tip.
3. If an additional transformer, Automatic Voltage Regulator (AVR), etc.  are required, please consult with us or our agent in the region.
4. Depending on the PCB under test, it requires to setup the right input voltage level.
5. Low Resistance measurement range not included.
6. Consult with us or our agent for the details.