Application
Max. Test area		510mm x 340mm
Board size		50mm x 50mm    -   520mm x350mm
Board thickness		0.05mm - 9 mm
Min. Testing size Note1		Pattern pitch	50µm  (Note1)
		Pad size	10µm  (Note1,2)
Specification		Standard	Option
Dimensions/Weight		1560mm (w) x 810mm(d) x 1766mm (h) / 1050Kg
Power requirements		AC 200V ±10 %  3ф/30A       (Note3)
Probe	Probe heads	4 Probe heads  (2probes each side)
	Repeatability accuracy	±2 µm
	Contact pressure	2 -10 g (min)
CCD camera		2 Units ( 1unit /side)		Hi-Magnification camera for smaller pad less than 75 µm
Isolation Test voltage		1000V (max)                  (Note4)
Low resistance Test current		100mA         (Typ)
Test method	Open detection       (continuity test) Note5	Range: 1 - 10MΩ
	Short detection (Isolation test)	Range: up to 500MΩ max		Range: up to 1GΩ max
	Capacitance measurement	Comparison with master data
	4wire               2wire Low.resistance.measurement	Range: 1mΩ- 4.8Ω Range: 0.1Ω- 10MΩ
	Resistance             Capacitance             Inductance Embedded passive component test function Option	Range: 1mΩ to 10MΩ (Typ) including 4WK range Range:1pF to 10uF     (Typ) Range:10uH to 100mH  (Typ)
Data Management	Input format	IPC D 356A /MNF /Others
	Job Creator	Job Creator  Optionally available from Miyachi
	Test data preparation	Smart Miyachi  Optionally available from Miyachi
	Failure analysis	Commercially available s/w

Notes
1. Specified at room temperature = 23±3℃.
2. As the probing performance of machine, not as the specification including probe tip.
3. If an additional transformer, Automatic Voltage Regulator (AVR), etc.  are required, please consult with us or our agent in the region.
4. Depending on the PCB under test, it requires to setup the right input voltage level.
5. Low Resistance measurement range not included.
6. Consult with us or our agent for the details.